Large Format Display-LFD Training Course University of Jordan
Large Format Display-LFD Training Course University of Jordan Index I- AV & Data Cables II- LFD Control & Installation III- Data & Video Looping V- Samsung Smart Signage Platform SSSP Course Objective I- AV & Data Cables I- AV & Data Cables
What cables are available in digital signage? Audio Cables Video Cables AV Cables VGA DVI
HDMI DP Component Composite USB RS232 Ethernet Data Cables I- AV & Data Cables Display Port
Signal: Digital Audio (24bit, 8ch PCM) Digital Video (3840X2160 @60Hz) Max Length: 15m (up to 1920X1080 Full HD) 2m (4K) Variations: Dual-Mode Display Port Support for DVI, HDMI connections Considerations: Utilizes 128bit DPCP or 56bit HDCP I- AV & Data Cables DVI
Name: Digital Visual Interface Signal: Digital Video ONLY (up to a maximum resolution of 2560X1600 @60Hz DL) Max Length: 5m (up to 1920X1080 Full HD) Variations: DVI-Digital (Digital Video Only) DVI-Integrated (Digital/Analogue) Considerations: 3.5mm stereo audio cable is required to transmit audio between devices.
No HDCP key on loop-out. DVI-D (digital only, single link or dual link) DVI-A (analog only) DVI-I (integrated, combines digital and analog in the same connector; digital may be single or dual link) I- AV & Data Cables HDMI Name: High Definition Multimedia Interface Signal:
Digital Audio (24bit, 8ch PCM) Digital Video (4096X2160 @24Hz) Data (Ethernet, CEC, HDCP) Max Length: 5m/15m (up to 4K) Variations: Standard - Max Resolution 1080i High-Speed- Max Resolution 4K Considerations: Use of PC/AV timings depending on the source (Edit Name) I- AV & Data Cables VGA
Name: Video Graphics Array (VGA) Signal: Analogue Video ONLY (1920X1080 @85Hz) Max Length: 10m (up to 1024X768) 1m (1920X1080) Variations: Also known as: D-Sub, 15 Pin, RGB, Considerations: 3.5mm stereo audio cable is required to
transmit audio between devices. I- AV & Data Cables Composite Name: RCA/ Phono Connector Signal: Analogue Audio (Stereo) Analogue Video SD (768X576) Max Length: 5m/100m Considerations: Composite cables cannot be used at the same time with Component cables, due to
the need for an adapter to connect with the monitor I- AV & Data Cables Component Signal: Analogue Audio (Stereo) Analogue Video (1920X1080) Max Length: 5m/100m Considerations: Component cables cannot be used at the same time with Composite cables, due to the need for an adapter to connect with the monitor
I- AV & Data Cables MagicInfo (SBB) SBB (Set Back Box) is optional and sold separately, there are various types of SBB according to installation type and connection type. SBB-A,B,C: installed on the back or slide in the monitor (depends on model) with external connection PIM (Plug in Module): installed on the back and have special cable to connect inside the monitor MagicInfo Cable: Specialized cable from Samsung which transfer Video + Audio + Data (Commands) SBB Cable connection: SBB-A,B (DP HDMI); SBB-C (DP DVI) MagicInfo Cable
PIM SBB I- AV & Data Cables RS232C RS232 was first introduced in 1962 by the Radio Sector of the American Electronic Industries Alliance (EIA). RS232 uses a serial connection, an interface through which information transfers in or out one bit at a time. RS232 connections have been superseded by USB, but they still offer a simple and cheap method of communicating with devices for control, configuration and diagnostic purposes.
The RS232C In/Out connection ports can be used to create a data link between the screens. This then allows the screens to be remotely controlled using Samsungs MDC (Multi Display Control) software. I- AV & Data Cables Ethernet A data connection can be created using an Ethernet cable to each display screen. Each display screen will be assigned a unique IP address, therefore network switches will be needed for larger installations.
RS232/Ethernet Mix It is possible to create a data loop using a mixture of Ethernet and RS232 cabling. An Ethernet cable is connected from a DHCP server (commonly a router) to the first screen. The data loop is then continued with RS232 cables I- AV & Data Cables USB Name: Universal Serial Bus Signal: Digital Data Power
Function: Firmware updates Basic content scheduling External Audio System When using LFDs in a video wall configuration, audio will be played using the internal speakers of the first screen ONLY, unless looped using DP. No audio is passed to the other screens when using a DVI loop-through configuration. To output the audio to an external audio system, a 3.5mm stereo audio cable can be connected to the Audio out jack of screen one. I- AV & Data Cables Digital Rights Management
High-Bandwidth Digital Content Protection HDCP is a 56bit industry standard content protection standard developed by INTEL The system is meant to stop encrypted content from being played on unauthorized devices or devices which have been modified to copy HDCP encrypted content. Before sending data, a transmitting device checks that the receiver is authorized to receive it. If so, the transmitter encrypts the data to prevent eavesdropping as it flows to the receiver. HDCP compatible cables include DP, HDMI and some proprietary DVI cables. For HDCP support devices (BlueRay, DVD, ); No loop out active Display Port Content Protection DPCP was developed by PHILIPS for use with Display Port technologies and is using a 128bit Advanced Encryption Standard (AES) Alongside the traditional content protection technologies, DPCP also has the ability to verify the proximity of the receiver and transmitter, a technique intended to ensure users are not
bypassing the content protection system to send data out to distant, unauthorized users. For DPCP support devices (BlueRay, DVD, ); Loop out for 8 LFDs max. II- LFD Control & Installation II- LFD Control & Installation II- LFD Control & Installation II- LFD Control & Installation II- LFD Control & Installation II- LFD Control & Installation
II- LFD Control & Installation II- LFD Control & Installation II- LFD Control & Installation MDC Introduction What is MDC? Multiple display control (MDC ) Unified MDC Unified MDC is an application that allows you to easily control multiple display devices simultaneously using a PC MDC Connection
Select MDC communication method ID Setup RS232C MDC : using the RS232C(serial) cable RJ45 MDC : using the RJ45(LAN) cable Set the special ID to each LFD. (range : 0~99)
ID Input Using for multiple LFD in small area. Menu > System > Multi Control II- LFD Control & Installation MDC Features Power Control input source control Panel Control Lamp Control
Remote Control Reset Picture, Sound, System, All Information Video Wall Scheduling ID Auto Set II- LFD Control & Installation Tilting Angle and Rotation The monitor can be tilted at a maximum angle of 15o from a perpendicular wall surface To use the monitor in portrait orientation, rotate
the monitor clockwise until the spacer logo faces down 2014 Model Before 2014 Model II- LFD Control & Installation - It is strongly recommended that ambient temperature is under 30 for video-wall installation. - Considerable amount of heat is added to the upper units. internal T of uppermost unit is 5 ~ 10 higher than the lowest unit. (Even there is adequate distance from the wall) For more than 6 rows, auxiliary air conditioning system will be required.
a : distance from the wall (recommended) Configuration 1x1 2x2 3x3 4x4 5x5 a [mm] 40
80 120 160 200 II- LFD Control & Installation - Ambient temperature under 30 is also recommended for embedded video-wall.
- Distance from the rear wall is same as vertical wall mount case. a : same as vertical installation b = c = d : identical gap Recommended distances Configuration 1x1 2x2 3x3 4x4
5x5 a [mm] 40 80 120 160 200 b (= c = d) [mm] 50
100 150 200 250 Additional fans are required in order to decrease side gaps(b, c, d) For aesthetic purpose III- Data & Video Looping Video looping up to 100 display Multi Control via RJ45/RS232C III- Data & Video Looping
IR Looping 3.5 mm Auxiliary Stereo audio cable used to make the sensor loop between LFDs When the cable is connected to form IR loop, the built-in IR sensor disabled. IR Out IR Out IR IN
III- Data & Video Looping DVI Looping A/B Series- It is theoretically possible to link 100 screens using DVI loop, however, in practice it is advised not to exceed a maximum loop of around 20 screens without the addition of distribution amplifiers (DAs) - Easy Setting for Simple Video wall * Without Network model * OSD ID setting DVI/DP out DVI: Recommended not to exceed 16 LFDs connection DP: Can reach up to 100 LFDs with much faster response time than DVI
DVI/DP out DVI/DP out C Series and up LFDs allow looping using DP cables, but will be limited to linking a maximum of 8 screens incase of license restrictions (HDCP, DPCP) DVI/DP out DVI/DP out DVI/DP out DVI/DP out DVI/DP out DVI/DP out
DP Looping III- Data & Video Looping Connection Type: RS232C: Connection 1 RJ45: Connection 2 RS232C/Ethernet Mix: Connection 3 III- Data & Video Looping Work Sheet III- Data & Video Looping Solution V- Samsung Smart Signage Platform
SSSP Contents management solution for Modern Digital Signage Visual Display Solutions V- Samsung Smart Signage Platform SSSP What is Software for Digital Signage ? Most digital signage S/W consist of 3 parts ; Designing Contents Scheduling & Managing Contents and client devices Playing Contents V- Samsung Smart Signage Platform SSSP Digital Signage Scenarios LFD installation (Usage)
Regular VW Stand alone Video Wall LFD Video wall types: According to Shape Regular VW Irregular VW According to connection H/W Video Wall S/W Video Wall According to used SW
MagicInfo VW-S MagicInfo VW-i Irregular VW V- Samsung Smart Signage Platform SSSP Samsung Smart Signage Hierarchy MagicInfo i ( Windows ) Premium Lite (SSSP)
SBB + Other Display Free Author S/W Support DataLink, Mobile Control VideoWall MagicInf o WEB based Lite display content between bezel with any angle Video Wall with other source ( PC, DVI ) (H/W Schedule included)
Simple Signage Local Schedule, USB Auto Play Up to 25 connections (free) Premium MagicInfo S/S2 (SSSP) WEB based No need SBB Local Schedule Video Wall Display content between bezel Support Schedule Mode only
No need SBB V- Samsung Smart Signage Platform SSSP Features Chart MagicInfo Premium i Remote Management Via Network Infra Contents Play Network Scheduling Monitoring - Screen Status(on/off, disconnection)
- IP Configuration( IP/MAC address) - Location/Grouping/Temperature Controlling - On/Off, Volume, Source, Mute Multi Frame Set Datalink update V- Samsung Smart Signage Platform SSSP Features Chart MagicInfo Premium S/S2 Remote Management
Via Network Infra Contents Play Network Scheduling Remocon Scheduling Template Play Auto Play Monitoring - Screen Status(on/off, disconnection)
- IP Configuration( IP/MAC address) - Location/Grouping/Temperature Controlling - On/Off, Volume, Source, Mute Plug & Play Turn On & play V- Samsung Smart Signage Platform SSSP Features Chart MagicInfo VideoWall i Via Network Infra Remote Management
Network Scheduling & Scene edit PC Source PW Off Monitoring - Screen Status(on/off, disconnection) - IP Configuration( IP/MAC address) - Location/Grouping/Temperature Controlling - On/Off, Volume, Source, Mute Scheduling - Time/ Date based Schedule
- Schedule with other source Changing Scene Editor - Instant publishing, live playing, input source change - Conetnt Zoom, PC screen V- Samsung Smart Signage Platform SSSP Features Chart MagicInfo VideoWall S Via Network Infra Remote Management Network Scheduling
PC Source PW Off Monitoring - Screen Status(on/off, disconnection) - IP Configuration( IP/MAC address) - Location/Grouping/Temperature Controlling - On/Off, Volume, Source, Mute Scheduling - Time/ Date based Schedule - Schedule with other source Changing V- Samsung Smart Signage Platform SSSP Various VW Scenario
2x4 2x2 5x5 Overlay Different Sizes LFD Product Reference Guides LFD Recommendation Guide Q4 2018 LFD Touch Overlay Reference Q4 2018 Samsung LFD Model Number Naming Conventions Q4 2018 Guide to Updating LFD Firmware via USB Q4 2018 Guide to Implementing EX-LINK (RS232) on BEN Series LFDs
Guide to Setting Custom Home Page for LFD Onboard Browser Offline Content Scheduling Guide S4 Player Offline Content Scheduling Guide S3 Player V- Samsung Smart Signage Platform SSSP
CONSULTA DE ENFERMEDADES DE TRANSMISIÓN SEXUAL. SAN SEBASTIÁN. AÑO 2005 Plan de Prevención y Control del Sida del País Vasco CONSULTA DE ENFERMEDADES DE TRANSMISIÓN SEXUAL Durante el año 2005, 199 personas han acudido a la consulta de ETS de...
Thank you for your attention. You can always contact us: [email protected] Click here if you wish to go back to the main menu Slide * * June 08 HR Training Department - Steffen Fobe The complete explanation about b.trained can...
Molten rock, including small components of dissolved gases, produced where lithospheric plates interact with other earth materials is called MAGMA Lava- magma from a volcano Typically produce composite volcanoes, whose magma is high in silica content.
How are these deponent verbs different than other verbs in Latin? Deponent verbs only have 3 principle parts; whereas Latin verbs have 4 principle parts. 1st pp: I_____ 2nd pp: to _____ 3rd pp: I _____ed. Based on what you...
Boys Soccer . Girls Soccer. Softball . Girls Tennis. Girls and Boys Volleyball. ... *This course is designed for students who intend on taking AP World History & AP US History in the future. HONORS PROGRAM. If your student is...
Type of hand floats. Wood. Magnesium. Composition. ... Dry-cut and wet-cut saws with an abrasive or diamond blade to cut contraction joints in large concrete surfaces. Dry-cut saws. Lighter than wet-cut saws. ... Planning for slab-on-ground placement
Watch a cooking show on TV, and record all of the good and bad health, safety and hygiene points that you see. Research 5 pieces of food manufacturing equipment that would be used in the food industry. Research how one...
Ready to download the document? Go ahead and hit continue!