1926 OSHINTRO 11.01.17-Internal

1926 OSHINTRO 11.01.17-Internal

Introduction to the N.C. Department of Labor OSH Division Understanding OSH in N.C. Presented by: ETTA, Dept of Labor, 919-707-7876 This presentation was created by the N.C. Department of Labor for safety and health training. Objectives In this course, we will discuss the following: - Occupational Safety and Health Act - OSH Division and its various bureaus

Functions of each bureau How each bureau can assist you - Standards that employers must follow in North Carolina This presentation was created by the N.C. Department of Labor for safety and health training. Occupational Safety and Health Act Williams - Steiger Occupational Safety and Health Act of 1970 (OSHA) is a federal law enacted to protect workers - Enacted into law on December 29, 1970

- Also referred to as Public Law 91-596 Passed by 91st Congress and signed by President Nixon This presentation was created by the N.C. Department of Labor for safety and health training. North Carolina is a State OSHA Plan Under Section 18 of the Occupational Safety and Health Act - (b) Any State which, at any time, desires to assume responsibility for development and enforcement therein of occupational safety and health standards relating to any occupational safety or health issue with respect to which a Federal standard has been

promulgated under section 6 shall submit a State plan for the development of such standards and their enforcement. This presentation was created by the N.C. Department of Labor for safety and health training. North Carolina State Plan NCGS 95-126 Occupational Safety and Health Act of North Carolina was signed into law in 1973 - Must be as effective as Federal OSHA

- Monitored by Federal OSHA Majority of the standards are adopted verbatim from Federal OSHA Any state desiring Federal OSHA approval for private sector occupational safety and health program must also cover its state and local government workers This presentation was created by the N.C. Department of Labor for safety and health training. Rules and Standards North Carolina General Statutes (NCGS)

North Carolina Administrative Code (NCAC) Code of Federal Regulations (CFR) Mancomm This presentation was created by the N.C. Department of Labor for safety and health training. North Carolina General Statutes North Carolina OSH Act - General Duty Clause - Inspections (Right to enter/right to inspect) - Employer/employee rights and responsibilities Safety and Health Programs and Committees

Act Right to Know Act Migrant Housing Act This presentation was created by the N.C. Department of Labor for safety and health training. North Carolina OSH Act NCGS 95-129(1) General Duty Clause - Each employer shall furnish to each of his

employees conditions of employment, and - A place of employment which are free from recognized hazards that are causing or are likely to cause death or serious physical harm to his employees. This presentation was created by the N.C. Department of Labor for safety and health training. North Carolina OSH Act NCGS 95-129(1) The employer failed to keep the workplace free

of a hazard to which employees of that employer were exposed and: - The hazard was recognized in the industry, - The hazard was causing or likely to cause death or serious physical harm, and - There was a feasible and useful method to correct the hazard. This presentation was created by the N.C. Department of Labor for safety and health training. North Carolina OSH Act NCGS 95-129(1)

Key points - Consensus standards; ANSI, NFPA, NEC - Manufacturers use and maintenance - Industry knowledge/best practice General duty provisions shall be used only where there is no OSHA standard that applies to the particular hazard involved - i.e.; ergonomics, heat stress, indoor air quality This presentation was created by the N.C. Department of Labor for safety and health training. North Carolina OSH Act

NCGS 95-136 Inspections - Right to enter without delay and at any reasonable time - Right to inspect and investigate during regular working hours NCDOL Photo Library This presentation was created by the N.C. Department of Labor for safety and health training. North Carolina OSH Act

NCGS 95-129 Rights and responsibilities - Employers Furnish employees with safe and healthy working conditions Comply with occupational safety and health standards May participate in hearings on proposed standards Entitled to review any citation This presentation was created by the N.C. Department of Labor for safety and health training.

North Carolina OSH Act NCGS 95-130 Rights and responsibilities - Employees Must comply with the standards Obtain training from their employer on any chemicals or other hazardous materials they may be exposed to or working with, such as bloodborne pathogens Receive information about OSHA standards, job hazards, worker injuries, and workers' rights from their employer This presentation was created by the N.C. Department of Labor for safety and health training.

North Carolina OSH Act NCGS 95-130 Request that a dangerous condition or OSHA violation is corrected by their employer File complaint to OSHA of a violation or serious hazard in the workplace and to have their name withheld from their employer Be involved in any OSHA inspection, find out the results of the inspection, and if necessary, appeal the final action File complaint to OSHA without possibility of retaliation or other discriminatory acts by their employer This presentation was created by the N.C. Department of

Labor for safety and health training. Safety & Health Programs & Committees Act NCGS 95-251/252 Requires written safety and health programs and safety committees in workplaces with high experience rate modifiers (1.5 or higher) OSH notifies employers who must comply with this legislation NCDOL Photo Library

ERM Chart This presentation was created by the N.C. Department of Labor for safety and health training. Right To Know Act NCGS 95-173 through 221 Requires employers who manufacture, process, use, store, or produce hazardous chemicals to compile and maintain a Hazardous Substance List (NCGS 95-191)

- Copy provided to Fire Chief - Updated at least annually This presentation was created by the N.C. Department of Labor for safety and health training. Migrant Housing Act NCGS 95222 through 229 Requires housing provided to migrant agricultural laborers be registered with and inspected by the State

NCDOL Photo Library - Responsibility is handled by the Agricultural Safety and Health (ASH) Bureau of the N.C. Department of Labor This presentation was created by the N.C. Department of Labor for safety and health training. North Carolina Administrative Code Title 13 (Labor) Chapter 7 (OSH) - Subchapter A General Rules and Operational Procedures - Subchapter F Standards

- Subchapter G Handling of Antineoplastic Agents Takes precedence over the Federal Regulations Incorporates the CFR NCDOL Photo Library This presentation was created by the N.C. Department of Labor for safety and health training. Code of Federal Regulations 29 CFR 1904 Recordkeeping 29 CFR 1910 General Industry 29 CFR 1915 Shipyards* 29 CFR 1917 Marine Terminals* 29 CFR 1926 Construction 29 CFR 1928 Agriculture

* Applies only to the Public Sector This presentation was created by the N.C. Department of Labor for safety and health training. State - Specific Standards NCDOL Photo Library General Industry - Hazardous materials Maritime (Public Sector only) Blasting and Use of Explosives Communication Towers

NCDOL Photo Library Handling of Antineoplastic Agents This presentation was created by the N.C. Department of Labor for safety and health training. State - Specific Standards Construction - General Safety and Health Provisions Personal protective equipment (PPE) - Occupational Health and Environmental Controls Nonionizing radiation - Personal Protective and Life Saving Equipment

- Steel Erection - Toxic and Hazardous Substances Bloodborne pathogens This presentation was created by the N.C. Department of Labor for safety and health training. North Carolina Department of Labor OSH Division Consultative Services Bureau Education,

Training and Technical Assistance Bureau Agricultural Safety and Health Bureau Planning, Statistics East

and and West Information Compliance Management Bureaus Bureau NCDOL Photo Library This presentation was created by the N.C. Department of Labor for safety and health training. Consultative Services On-site Consultation - Safety and health surveys

- Technical assistance - Safety and health program assessment and assistance - Hazard identification - Air sampling and analysis - Noise measurements Photo courtesy NCDOL Photo of Rodgers Library Builders Safety and Health Achievement Recognition This presentation was created by the N.C. Department of

Labor for safety and health training. Education, Training and Technical Assistance Recognition Programs - Safety Awards - Carolina Star Programs Carolina Star Rising Star Building Star Public Sector NCDOL Photo Library Alliances NCDOL Photo Library

This presentation was created by the N.C. Department of Labor for safety and health training. Education, Training and Technical Assistance Education and Training - Safety and health workshops - Speakers bureau - Webinars - Display booths - Labor One mobile training unit - Training calendar NCDOL Photo Library

NCDOL Photo Library This presentation was created by the N.C. Department of Labor for safety and health training. Education, Training and Technical Assistance Technical Assistance - Federal standards review for state adoption - Coordinate State - specific rulemaking activities - Interpretation assistance NCDOL Photo Library NCDOL Photo Library

- Publications (English and Spanish) This presentation was created by the N.C. Department of Labor for safety and health training. NCDOL Photo Library - Variance applications Education, Training and Technical Assistance Library - Provide research assistance (e.g.; consensus standards)

- Loan videos, DVDs and publications - On - line catalog - Streaming video NCDOL Photo Library This presentation was created by the N.C. Department of Labor for safety and health training. Agricultural Safety and Health Conduct inspections in agricultural workplaces - Complaint, fatality, and referral NCDOL Photo Library

- Conduct pre-occupancy inspections of migrant housing Bilingual outreach program ASH publications Gold Star Grower Housing Program This presentation was created by the N.C. Department of Labor for safety and health training. Planning, Statistics and Information Management OSH Compliance inspection targeting system Coordinate OSH Division strategic planning Manage OSH Compliance and ASH inspection targeting system Case file management (disclose Compliance,

ASH, and Employment Discrimination Bureau (EDB) files and archive Compliance/ASH files) Compile/analyze OSH Division statistical data This presentation was created by the N.C. Department of Labor for safety and health training. East and West Compliance Enforcement of the OSH standards - Conduct safety and health compliance inspections - Recommend the issuance of citations and penalties - Ensure the completion of abatements and/or corrective actions - Manage the OSH Complaint Desk

NCDOL Photo Library - Partnerships This presentation was created by the N.C. Department of Labor for safety and health training. Contact Information and Resources NCDOL web site: www.labor.nc.gov Federal OSHA web site: ETTA:

www.osha.gov 919-707-7876 Consultative Services: 919-707-7846 NCDOL toll-free: 1-800-NC-LABOR (1-800-625-2267) Complaint/Referral/Fatality:

919-779-8560 This presentation was created by the N.C. Department of Labor for safety and health training. Summary In this course, we discussed the following: - Occupational Safety and Health Act - OSH Division and its various bureaus Functions of each bureau How each bureau can assist you - Standards that employers must follow in North

Carolina This presentation was created by the N.C. Department of Labor for safety and health training. Thank You For Attending! Final Questions? 1-800-NC-LABOR (1-800-625-2267) www.labor.nc.gov This presentation was created by the N.C. Department of Labor for safety and health training.

Understanding the Code of Federal Regulations (CFR) Construction Industry (29 CFR 1926) Presented by: ETTA, Dept of Labor, 919-707-7876 This presentation was created by the N.C. Department of Labor for safety and health training. Objectives Demonstrate how to read the standards Define vertical and horizontal standards Practice finding standards This presentation was created by the N.C. Department of

Labor for safety and health training. Reading the Code of Federal Regulations Do you know what these numbers and letters represent? 29 CFR 1926.703(c)(1)(ii) 29 (Title) CFR (Code of Federal Regulations) 1926 (Part) 703 (c)(1)(ii) (Section) This presentation was created by the N.C. Department of Labor for safety and health training. Federal Government

Statutes Chapter Code Part Title Subpart Subtitle Section (standard)

Mancomm This presentation was created by the N.C. Department of Labor for safety and health training. Code of Federal Regulations Occupational Safety and Health - 29 CFR 1904 Recordkeeping - 29 CFR 1910 General Industry - 29 CFR 1915 Shipyards - 29 CFR 1917 Marine Terminals - 29 CFR 1926 Construction - 29 CFR 1928 Agriculture

Mancomm This presentation was created by the N.C. Department of Labor for safety and health training. Types of Standards Standards can be described as being: - Horizontal NCDOL Photo Library Relevant to all industries - Vertical

NCDOL Photo Library or Relevant to only a particular industry This presentation was created by the N.C. Department of Labor for safety and health training. Consensus Standards CFR 1910.6 Incorporated by reference

- American Conference of Governmental Industrial Hygienists (ACGIH) - American Society of Agricultural Engineers (ASAE) - American National Standards Institute (ANSI) - American Society of Mechanical Engineers (ASME) - American Society for Testing and Materials (ASTM) - American Welding Society (AWS) - Department of Commerce (U.S. Government) This presentation was created by the N.C. Department of Labor for safety and health training. Other Useful Information North Carolina Administrative Code (NCAC)

Addendum Letters of interpretation Index NCDOL Photo Library This presentation was created by the N.C. Department of Labor for safety and health training. Lets Work On Examples Mancomm This presentation was created by the N.C. Department of Labor for safety and health training.

Standards Look-up Practice finding the Communication Tower Standards specific to North Carolina: Section 13 NCAC 07F.0600 - On which page is this located in your standards book? This presentation was created by the N.C. Department of Labor for safety and health training. Standards Look-up Practice finding the standard for Recording and Reporting Occupational Injuries and Illnesses: 29 CFR 1904 - On which page is this located in your standards book?

Which standard contains the recordability decision tree? Which standard outlines the requirements for1904.4(b)(2) reporting fatalities and multiple hospitalization incidents to OSHA? 1904.39 This presentation was created by the N.C. Department of Labor for safety and health training. Questions At what height is fall protection required in steel erection?

1926.760(a)(1) At what excavation depth do I need to protect my employees from a trench cave-in? 1926.652(a)(1)(ii) What should be done with portable ladders with structural defects? 1926.1053(b)(16) This presentation was created by the N.C. Department of Labor for safety and health training.

Which standard addresses this hazard? Standard(s) violated: This presentation was created by the N.C. Department of Labor for safety and health training. Which standard addresses this hazard? Standard(s) violated: - 1926.1053(a)(8) Metal spreader or locking device shall be provided on each side of portable ladder and be open while ladder is in use.

This presentation was created by the N.C. Department of Labor for safety and health training. Which standard addresses this hazard? Standard(s) violated: This presentation was created by the N.C. Department of Labor for safety and health training. Which standard addresses this hazard? Standard(s) violated: - 1926.501(b)(11) Each employee on a steep roof with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be

protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems. This presentation was created by the N.C. Department of Labor for safety and health training. Which standard addresses this hazard? Standard(s) violated: - 1926.1053(b)(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access.. This presentation was created by the N.C. Department of

Labor for safety and health training. Summary In this course, we: - Demonstrated how to read the standards - Defined vertical and horizontal standards - Practiced finding standards in the standards book This presentation was created by the N.C. Department of Labor for safety and health training. Thank You For Attending! Final Questions?

1-800-NC-LABOR (1-800-625-2267) www.labor.nc.gov This presentation was created by the N.C. Department of Labor for safety and health training.

Recently Viewed Presentations

  • Global Privacy and Information Quality Working Group Product

    Global Privacy and Information Quality Working Group Product

    3.2.4 Future Guidance Statement Section 4 Governance 4.1 Identifying the Champion 4.2 Resource Justification 4.3 Identifying the Project Leader 4.4 Building the Project Team and Stakeholder Contacts Section 5 Planning 5.1 Developing a Vision, Mission, Values Statement, and Goals and...
  • Practical Web/E-Commerce Testing Part 1  Functional Testing Robert

    Practical Web/E-Commerce Testing Part 1 Functional Testing Robert

    Web Tier Application Tier Data Tier Practical Web/E-Commerce Testing Part 1 - Functional Testing Robert Sabourin , Software Evangelist President AmiBug.Com Inc. Montreal, Quebec, Canada [email protected] Software Development & SQA Consulting Services Training, Coaching and Professional Development Light Effective Process...
  • Political Parties - Commack Schools

    Political Parties - Commack Schools

    Political Parties Party Systems and Party Roles Two-Party System America's Party History Minor Parties What is a Political Party? A Political Party is a group of people who share similar beliefs about government.
  • L.O recognise lines of symmetry TRUE FALSE L.O

    L.O recognise lines of symmetry TRUE FALSE L.O

    L.O recognise lines of symmetry TRUE FALSE L.O recognise lines of symmetry TRUE FALSE L.O recognise lines of symmetry TRUE FALSE L.O recognise lines of symmetry TRUE ...
  • Form and Function in 2D Design - David Javelosa

    Form and Function in 2D Design - David Javelosa

    Form and Function in 2D Design An Approach To Making Better Game Design Understanding 2D Design Terminology Theory and Methods Design Elements and Interactivity Color Composition Meaning and Intentionality Message Terminology Design - the arrangement of visual elements that contribute...
  • Cells - henry.k12.ky.us

    Cells - henry.k12.ky.us

    Eukaryotic cells contain an organelle called a nucleus that houses the DNA for the cell. ... Cytoskeleton- helps the cell move, keep its shape, and organize its parts. ... define and tell how that particular organelle helps the cell function.
  • Grant Writing Workshop

    Grant Writing Workshop

    The Hart's Ladder of Participation shows the levels of participation of youth. The high we go up the ladder the more impactful the project will be. Make sure you reference this while planning. It is available on the application website.
  • Welcome to the Daily Sting! Yulee Hornets SOAR

    Welcome to the Daily Sting! Yulee Hornets SOAR

    Kwanzaa 2019 December 26--January 1, 2020. Created by Dr. Maulana Karenga, professor. at California State University, Long Beach in. 1966. Is an annual week-long celebration. Created to unite African-Americans after