Transcription

Data SheetCisco Catalyst 6900 Series Ethernet Interface Module for CiscoCatalyst 6500 Series SwitchesProduct OverviewThe Cisco Catalyst 6500 Series Switches offer a variety of 10 Gigabit Ethernet modules to serve different needs inthe campus and data center for enterprise, commercial, and service provider customers. The Cisco Catalyst 6900Series 8-port 10 Gigabit Ethernet Fiber Module is the first 10 Gigabit Ethernet Module for the Cisco Catalyst 6500Series Switch that supports Cisco TrustSec and Layer 2 encryption in hardware to enable IEEE 802.1ae (MACSec)encryption for Role-Based Access Control (RBACL) functionality. The module has two 40 Gbps connections (for atotal of 80 Gbps) to the 2Tbps switch fabric of the Supervisor Engine 2T and therefore is able to deliver 10 Gigabitperformance on all 8 ports for larger than 128 bytes size packets with no oversubscription. The new Cisco Catalyst6900 Series 8-port 10 Gigabit Ethernet Fiber module supports Virtual Switch Link (VSL) on all 8 ports. The CiscoCatalyst 6900 Series 8-port 10 Gigabit Ethernet Fiber Module supports pluggable X2 optics, providing operationaldistances of up to 80 km over single-mode fiber and 300m over multimode fiber allowing for deployment in varioustypes of networking environments. The Cisco Catalyst 6900 Series 8-Port 10 Gigabit Ethernet Fiber Module is onlycompatible with the new Cisco Catalyst 6500 Supervisor Engine 2T (VS-S2T-10G or VS-S2T-10G-XL), enabling thesystem to deliver three times the performance and four times the scalability for Cisco Catalyst 6500 Series Switchesin comparison to the previous generation.The new Cisco Catalyst 6900 Series 8-Port 10 Gigabit Ethernet Fiber module is designed for deployment in thedistribution and core of the campus and data center for traffic aggregation in a network requiring security,manageability, virtualization, application performance, and video. With its large 256 MB packet buffers per port, nooversubscription, and distributed forwarding with high scalability, the new Cisco Catalyst 6900 Series 8-port 10Gigabit Ethernet Fiber module is able to deliver secure and predictable performance for bandwidth-intensiveapplications such as market data feeds in the financial vertical or video broadcast in campus networks.The 8-Port 10 Gigabit Ethernet Fiber Module (Figure 1) provides up to 88 10 Gigabit Ethernet Fiber ports in a singleCisco Catalyst 6513-E chassis and 176 10 Gigabit Ethernet ports in a Cisco Catalyst 6500 Virtual Switching System(VSS) 4T.Figure 1.Cisco Catalyst 6900 Series 8-Port 10 Gigabit Ethernet Fiber Module 2011-2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.Page 1 of 7

Data SheetFor more information, see the white paper discussing 10 Gigabit Ethernet switching for enterprises ps708/products white paper0900aecd802a648b.shtml.Main Features and BenefitsTable 1 summarizes the primary features and benefits of the Cisco Catalyst 6900 Series 8-Port 10 Gigabit EthernetFiber Module.Table 1.Cisco Catalyst 6900 Series 8-Port 10 Gigabit Ethernet Fiber Module Primary FeaturesFeatureCisco Catalyst 6900 Series 8-Port 10GbE Fiber ModulePorts8OpticsX2Switch fabricconnection80 Gbps full duplexOversubscription1:1Forwarding engine WS-X6908-10G-2T: comes equipped with DFC4 for distributed forwarding, supporting 256K forwarding entries,increased ACL entries to 64K, increased Netflow entries to 512K, and increased IPv4 forwarding speed to 60 Mpps WS-X6908-10G-2TXL: equipped with DFC4XL for distributed forwarding, supporting 1 million forwarding entries,increased ACL entries to 256K, increased Netflow entries to 1 million and increased IPv4 forwarding speed to 60Mpps Increased performance of up to 60Mpps for L2, IPv4 and MPLS forwarding and up to 30Mpps for IPv6 forwarding Increased multicast routes to 256K Support for 16K Bridge Domains, allowing the standard 4K VLANs to be reused across these bridge domains,effectively increasing the number of VLANs available in the system Increased MAC Address Table to 128K IPV4 IGMPv3 snooping in hardware IPv6 MLDv2 snooping in hardware PIM registers in hardware IPV4 & IPv6 in IPv6 tunneling IPv6 in IPv4 tunneling (ISATAP, 6to4, GRE) QoS support for uniform, short pipe and pipe mode tunnel Terminate the tunnel in the same loopbackSecurity TrustSec and IEEE 802.1ae Layer 2 Encryption in HW to enable MACSecQueues Receive: 8q4t Transmit: 1p7q4tQueuing mechanisms Class of Service (CoS) based queue mapping Differentiated Service Code Point (DSCP) based queue mappingScheduler Deficit Weighted Round Robin (DWRR) Weighted Random Early Detection (WRED) Smoothed Round Robin (SRR) at egressPort buffers 256MB per portHardware-basedmulticast replication Ingress and egress Approximately 20 Gbps per replication engine 4 replication engines per module delivering total throughput of 80 GbpsJumbo frame supportfor bridged and routedpacketsUp to 9216 bytesMaximum port densityper chassis64 ports (6509-E chassis)Maximum port densityper VSS128 ports (6509-E chassis)Can be used to formvirtual switch linkYes (all ports)Supervisor enginessupportedSupervisor Engine 2T and 2TXL88 ports (6513-E chassis)176 ports (6513-E chassis) 2011-2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.Page 2 of 7

Data SheetFeatureCisco Catalyst 6900 Series 8-Port 10GbE Fiber ModuleChassis supported Any Cisco Catalyst 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E, 6513-E (NEBScompliant: operating temperature up to 55 C) Not supported in non-E Series chassis.Slot requirements Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506-E, 6509-E, or 6509-V-E chassis Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E chassisOnboard memory2 GB default (no higher upgrade)Table 2 summarizes pluggable optics supported on the Cisco Catalyst 6900 Series 8-Port 10 Gigabit Ethernet FiberModule.Table 2.Pluggable Optics for Cisco Catalyst 6900 Series 8-Port 10 Gigabit Ethernet Fiber ModulePart NumberTransceiver TypeWavelengthIEEE StandardMaximum Distance and Cable TypeX2-10GB-LRM10GBASE-LRM1310 nm serialIEEE 802.3aq220m over multimode fiberX2-10GB-LR!0GBASE-LR1310 nm serialIEEE 802.3ae10 km over single-mode fiberX2-10GB-SR10GBASE-SR850 nm serialIEEE 802.3ae1 26m over 62.5-micron FDDI-grade multimode fiber 33m over 62.5-micron 200 MHz x km multimodefiber 66m over 50-micron 400 MHz x km multimode fiber 82m over 50-micron 500 MHz x km multimode fiber 300m over 50-micron 2000 MHz x km multimodefiberX2-10GB-ER10GBASE-ER1550 nm serialIEEE 802.3aeX2-10GB-ZR10GBASE-ZR1550 nm serialX2-10GB-LX410GBASE-LX4WWDM 1310 nm IEEE 802.3ae40 km over single-mode fiber80 km over single-mode fiber 300m over 62.5-micron FDDI grade multimode fiber 240m over 50-micron 400 MHz x km multimode fiber 300m over 50-micron 500 MHz x km multimode fiberX2-10GB-CX410GBASE-CX4CopperIEEE 802.3ak15m over 8 pair 100-Ohm InfiniBand cableX2-10G-DWDMDWDM32 differentwavelengths;C band100 GHz ITU grid32 wavelengths over single strand of single-mode fiber;80 kmCVR-X2-SFP10GSFP converter forX2 portsSFP-10G-LRM10GBASE-LRM1310 nmIEEE 802.3220m over multimode fiberSFP-10G-LR10GBASE-LR1310 nmIEEE 802.310 k over single-mode fierSFP-10G-ER10GBASE-ER1550 nmIEEE 802.340 k over single-mode fiberSFP-H10GB-CU1M1Cisco 10GBASE(With CVR-X2-SFP10G CU SFP cableconverter for X2 ports)CopperSFP MSA SFF-84311-m 10G SFP Twinax cable assembly, passiveSFP-H10GB-CU3M1Cisco 10GBASE(With CVR-X2-SFP10G CU SFP cableconverter for X2 ports)CopperSFP MSA SFF-84313-m 10G SFP Twinax cable assembly, passiveSFP-H10GB-CU5M1Cisco 10GBASE(With CVR-X2-SFP10G CU SFP cableconverter for X2 ports)CopperSFP MSA SFF-84315-m 10G SFP Twinax cable assembly, passiveSFP-10G-SR (With10GBASE-SRCVR-X2-SFP10GSFP transceiverconverter for X2 ports) module850nmIEEE 802.3ae 26m over 62.5-micron FDDI-grade multimode fiber 33m over 62.5-micron 200 MHz x km multimodefiber 66m over 50-micron 400 MHz x km multimode fiber 82m over 50-micron 500 MHz x km multimode fiber 300m over 50-micron 2000 MHz x km multimodefiber1To calculate the exact distances that your module will support before installation, see optical specifications in the X2 data sheets.The exact distance supported varies according to the number of splices and connectors in a single-mode fiber strand.Cisco 10GBASE X2 modules data sheet 2011-2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.Page 3 of 7

Data SheetFor more information about most up to date EOS/EOL information on Cisco Catalyst 6500 Series Switchescompatible transceivers, visit 455/prod eol notices list.html.Product SpecificationsTable 3 lists product specifications of the Cisco Catalyst 6900 Series 8-Port 10 Gigabit Ethernet Fiber Module.Table 3.Product SpecificationsProductSpecificationsStandard protocolsIEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3ad, IEEE 802.3ae, IEEE802.3aq, and IEEE 802.3anPhysical specifications Occupies one slot in the Cisco Catalyst 6500 E-Series chassis Dimensions (H x W x D): 1.73 x 14.4 x 16 in. (4.4 x 36.6 x 40.6 cm) Weight: 12.6 pounds excluding X2 components; ΒΌ pound for each X2EnvironmentalconditionsOperating temperature: Agency-certified for operation: 32 to 104 F (0 to 40 C) Design and tested for operation 32 to 130 F (0 to 55 C) Storage temperature: -40 to 167 F (-40 to 75 C) Relative humidity: 10 to 90 percent, noncondensingOperating altitude: Agency-certified for operation: -500 to 6500 ft (-150 to 2000m) Designed and tested for operation -500 to 10000 ft (-150 to 3000m)Regulatory complianceCisco Catalyst 6500 Series 10 Gigabit Ethernet Fiber modules, when installed in a system, comply with the followingEMC and safety standards:EMC Standards: FCC Part 15 (CFR 47) Class A ICES-003 Class A VCCI Class A EN55022 Class A EN55024 CISPR24 CISPR 22 Class A AS/NZS CISPR 22 Class A ETS 300 386 KN 22 Class A EN61000-3-2 EN61000-3-3 CNS13438 Class ASafety Standards: UL 60950-1 CAN/CSA C22.2 No. 60950 EN 60950-1 IEC 60950-1 AS/NZS 60950-1NEBS criteria levelsETSI2SR-3580 Issue 3, June 2007 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 4) ETS 300 019-2-1, Class 1.2 Storage ETS 300 019-2-2, 2.3 Transportation ETS 300 019-2-3, Class 3.2 Stationary Use2In NEBs environments you will require to install Airdams in slots immediately above and below in the adjacent slots to eachinstalled 6900 Series 8 Port 10 Gigabit Ethernet Fiber Module if no active Module is installed in those slots. The part number for theAirdam is WS-X6K-SLOT-CVR. 2011-2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.Page 4 of 7

Data SheetProductSpecificationsNetwork management ETHERLIKE-MIB (RFC 1643) IP-MIB and IP-FORWARD-MIB for IPv6 IF-MIB (RFC 1573) Bridge MIB (RFC 1493) CISCO-STACK-MIB CISCO-VTP-MIB CISCO-CDP-MIB RMON MIB (RFC 1757) CISCO-PAGP-MIB CISCO-STP-EXTENSIONS-MIB CISCO-VLAN-BRIDGE-MIB CISCO-VLAN-MEMBERSHIP-MIB ENTITY-MIB (RFC 2037) HC-RMON RFC1213-MIB (MIB-II) SMON-MIBPower requirements WS-X6908-10G-2T: 588 Watts Maximum WS-X6908-10G-2TXL: 603 Watts Maximum At the time of the writing of this datasheet, the final power numbers are not known. Please consult the 12.2(50)SYRelease Notes for these numbers if they are not provided here. Go to http://www.cisco.com/go/powercalculator for easy power consumption calculation. Status: green (operational), red (faulty), and orange (module booting) Link: green (port enabled and connected), orange (port disabled), and off (port enabled and not connected)Indicators Blue Beacon: Used to ID a specific module in a fully populated system, within a multi-system environmentOrdering InformationTable 4 gives ordering information.Table 4.Part Numbers for OrderingPart NumbersDescription10 Gigabit Ethernet Fiber ModulesWS-X6908-10G-2TCisco Catalyst 6900 Series 8-Port 10 Gigabit Ethernet Fiber Module with DFC4 (Requires X2)WS-X6908-10G-2TXLCisco Catalyst 6900 Series 8-Port 10 Gigabit Ethernet Fiber Module with DFC4XL (Requires X2)WS-X6908-10G-2T Cisco Catalyst 6900 Series 8-Port 10 Gigabit Ethernet Fiber Module with DFC4 (Requires X2) SpareWS-X6908-10G-2TXL Cisco Catalyst 6900 Series 8-Port 10 Gigabit Ethernet Fiber Module with DFC4XL (Requires X2) SpareWS-F6K-DFC4-EXL Cisco Catalyst 6500 Dist Fwd Card- DFC4XL Spare, for WS-X6908-10G-2TX2 OpticsX2-10GB-LRM10GBASE-LRM X2 (multimode fiber)XR-10GB-LR10GBASE-LR X2 (single-mode fiber)X2-10GB-SR10GBASE-SR X2 (multimode fiber)X2-10GB-ER10GBASE-ER X2 (single-mode fiber)X2-10GB-ZR10GBASE-ZR X2 (single-mode fiber)X2-10GB-LX410GBASE-LX4 X2 (multimode fiber)X2-10GB-CX410GBASE-CX4 X2 (copper InfiniBand cable)X2-10G-DWDM32 wavelengths over single strand of single-mode fiber; 80 kmSFP OpticsCVR-X2-SFP10GSFP converter for X2 portsSFP-10G-LRM10GBASE-LRM SFP Transceiver ModuleSFP-10G-LR10GBASE-LR SFP Transceiver ModuleSFP-10G-ER10GBASE-ER SFP Transceiver ModuleSFP-10G-SR10GBASE-SR SFP transceiver module 2011-2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.Page 5 of 7

Data SheetPart NumbersDescriptionSFP-H10GB-CU1M11-m 10G SFP Twinax cable assembly, passiveSFP-H10GB-CU3M13-m 10G SFP Twinax cable assembly, passiveSFP-H10GB-CU5M15-m 10G SFP Twinax cable assembly, passiveNote: 8-port 10 Gigabit Ethernet Fiber Module: WS-X6908-10G-2T ships with WS-X6908-10GE and WS-F6K-DFC4-E. WS-X6908-10G-2TXL ships with WS-X6908-10GE and WS-F6K-DFC4-EXL. The front panel of these modules is labeled:WS-X6908-10GE-2T orWS-X6908-10GE-2TXL if it is XL version Cisco IOS Software commands will display WS-X6908-10GE with either WS-F6K-DFC4-E or WS-F6KDFC4-EXL for XL version.Cisco and Partner Services for Expanding the Borderless NetworkDr