Transcription

Atlas OCAP M1056.fm Page 1 Tuesday, March 24, 2009 4:45 PMATLAS OCAP 5-DeviceRemote ControlTélécommandeATLAS OCAP 5 appareilsUsers GuideGuide d'utilisationPREPROGRAMMED FOR YOUR SET-TOP BOXPRÉPROGRAMMÉE POUR VOTRE DÉCODEUR

Atlas OCAP M1056.fm Page 2 Tuesday, March 24, 2009 4:45 PMTABLE OF CONTENTSIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Key Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Device Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Programming Device Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Setting Up a Combo Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Searching for Your Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Checking the Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Programming Channel Control Lock . . . . . . . . . . . . . . . . . . . . . . . . 14Unlocking Channel Control. . . . . . . . . . . . . . . . . . . . . . . . . . . 14Locking Channel Control to CBL. . . . . . . . . . . . . . . . . . . . . . . 14Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Unlocking Volume Control for a Single Device (IndividualVolume Unlock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Unlocking All Volume Control (Global Volume Unlock) . . . . . 16Locking Volume Control To One Mode (Global Volume Lock) 16Programming Cable ID Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Programming Macro Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Programming a Macro Key. . . . . . . . . . . . . . . . . . . . . . . . . . . 18Clearing a Macro Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Using the Master Power Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Programming the Master Power Key . . . . . . . . . . . . . . . . . . . 19Using the Master Power Key. . . . . . . . . . . . . . . . . . . . . . . . . . 20Clearing the Master Power Key . . . . . . . . . . . . . . . . . . . . . . . 20Re-Assigning Device Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Clearing Custom Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Activating Backlighting (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . 22Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23FCC Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Manufacturer’s Codes (Codes des manufacturiers) . . . . . . . . . . . . 54Setup Codes for Audio Amplifiers. . . . . . . . . . . . . . . . . . . . . . 54Setup Codes for Audio Receivers. . . . . . . . . . . . . . . . . . . . . . 54Setup Codes for Audio Accessories . . . . . . . . . . . . . . . . . . . . 57Setup Codes for Cable Boxes/Converters . . . . . . . . . . . . . . . 57Setup Codes for DVD Players . . . . . . . . . . . . . . . . . . . . . . . . . 59Setup Codes for DVD Recorders. . . . . . . . . . . . . . . . . . . . . . . 64Setup Codes for DVD Combos. . . . . . . . . . . . . . . . . . . . . . . . . 64Satellite Receivers and DVR/PVR Systems. . . . . . . . . . . . . . . 65Setup Codes for Satellite Receivers . . . . . . . . . . . . . . . . . . . 65Setup Codes for TVs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Setup Codes for TVs (DLP) . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Setup Codes for TVs (HDTV) . . . . . . . . . . . . . . . . . . . . . . . . . . 75Setup Codes for TVs (LCD) . . . . . . . . . . . . . . . . . . . . . . . . . . . 78Setup Codes for TV/DVD Combos . . . . . . . . . . . . . . . . . . . . . . 78Setup Codes for TV/VCR Combos . . . . . . . . . . . . . . . . . . . . . . 79www.urcsupport.com/atlasocap2

Atlas OCAP M1056.fm Page 3 Tuesday, March 24, 2009 4:45 PMSetup Codes for TV/VCR/DVD Combos . . . . . . . . . . . . . . . . . . 81Setup Codes for VCRs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82BACKLIGHTING TIPSSome Atlas OCAP models include backlighting forkeypad illumination. If you have backlighting, you willsee a light bulb on the SETUP key, as shown below.To Enable Backlighting1.Press the SETUP key twice.2.Backlighting will now turn on after anykeypress.To Disable Backlighting1.Press the SETUP key twice.2.Backlighting is now off.www.urcsupport.com/atlasocap3

Atlas OCAP M1056.fm Page 4 Tuesday, March 24, 2009 4:45 PMINTRODUCTIONThe Atlas OCAP 5-Device Remote Control by UniversalElectronics is our latest generation universal remotecontrol. Its sophisticated technology allows you toconsolidate up to five of your original homeentertainment remote controls into one easy-to-useproduct. Moreover, its packed with advanced featuressuch as: Preprogrammed control to operate the cableconverter supplied by your cable service provider Dedicated keys to control popular functions on yourDVR/PVR (Digital/Personal Video Recorder) Programmable Master Power key for master on/offcontrol of your home entertainment equipment witha single keystroke Programmable Macro Keys to allow you to activatecertain keys in a specific order Channel Lock to lock channel selection only to thecable converter Volume Lock to lock volume controls to one mode orindividual modes Device Key Re-Assignment to remotely control asecond (duplicate) device Code Search to help program control of older ordiscontinued components Color-coded keys to quickly locate popularfunctions Code library for popular video and audio devices Backlighting (not available on all remotes)Before using the product, you will need to install theenclosed batteries and also perform some programmingto operate the specific home entertainment devices youwish to control.Please follow the instructions detailed in this manual toset up the unit and then start enjoying your new remotecontrol and cable service.www.urcsupport.com/atlasocap4

Atlas OCAP M1056.fm Page 5 Tuesday, March 24, 2009 4:45 PMFEATURES AND FUNCTIONSUse the illustration below to locate features on the AtlasOCAP 5-Device Remote Control and then study the KeyCharts (on the next three pages) to learn how theyfunction.To find out what type of devices can be controlled byeach device key after programming, see “Device Table”on page 8 .www.urcsupport.com/atlasocap5

Atlas OCAP M1056.fm Page 6 Tuesday, March 24, 2009 4:45 PMKey ChartsKeyFunctionUse SETUP for all programmingsequences. Also use to turnbacklighting on and off, if applicable.Press PWR once to turn on or off a homeentertainment device. For MASTERPOWER control, see “Using the MasterPower Key” on page 19.Press VCR, DVD, AUD, TV, or CBL once toselect a home entertainment device tocontrol. Also see “Device Table” onpage 8.Each device key has an embedded LED(red light) that blinks upon selectionand indicates the remote control isworking and (after programming) issending signals.Use GUIDE to display the programguide.Press SETTINGS once to display availableinteractive services.Use INFO to display the current channeland program information.Use DAY (or DAY-) to move a dayforward (or back) on your cableconverter’s program guide.Use the Cursor keys to move the cursorin the program guide and menu screensand to navigate within the interactiveservice.Use OK/SELECT to choose options, PPVevents, and to tune to programs fromthe program guide.Use PAGE (or PAGE-) to page up (orpage down) through menu screens andthe program guide.Use EXIT to exit out of your cableconverters menu and guide.Use A, B, C, or D to access additionalcable features (see your cableconverter’s manual).www.urcsupport.com/atlasocap6

Atlas OCAP M1056.fm Page 7 Tuesday, March 24, 2009 4:45 PMKeyFunctionUse VOL (or VOL-) to raise (or lower)the audio volume.Use FAV to cycle through your favoritechannels stored in your cable converter.Use CH (or CH-) to select the nexthigher (or lower) channel.For DVD players, use these keys to skipforward (or reverse) through chapters.For amplifiers/receivers, use these keysto select the next higher (or lower)preset station.Press MUTE once to turn the sound offor on.Press LAST once to recall the lastchannel.Press ON DEMAND to access Video onDemand services.Reserved for use as Macro keys (see“Programming Macro Keys” onpage 17).Useto command your PVR/DVRcable box to instantly replay the last 7seconds of a program you are watching.Press LIST once to display a list ofrecorded shows on your PVR/DVR cablebox.Press LIVE to command your PVR/DVRcable box to return to watching live TV.In all modes except CBL, use REW, PLAY,FFWD, STOP, and PAUSE to control aVCR, DVD player, or a PVR (afterselecting a desired device). To record inthe VCR mode, press REC twice.In the CBL mode, use these keys tocontrol the DVR/PVR functions of theset-top box.Use the keypad numbers (1-9, and 0) todirectly tune channels (e.g., 09).For amplifiers/receivers, use the keypadnumbers to select inputs 1 through 10.www.urcsupport.com/atlasocap7

Atlas OCAP M1056.fm Page 8 Tuesday, March 24, 2009 4:45 PMKeyFunctionPress ASPECT once to change the aspectratio of the show you are watching. (Notavailable on all set-top boxes).Press SHIFT to access additional cablefeatures (see your cable converter’smanual).Use PIP ON-OFF to switch the PictureIn-Picture feature on or off (if availableon your TV or cable service).Use PIP SWAP to switch images andsound between the main and windowpictures (if available on your TV orcable service).Use PIP MOVE to move the window pictureto different positions in the main picture(if available on your TV or cableservice).Use PIP CH (or CH-) to select the nexthigher (or lower) PIP channel (ifavailable on your TV or cable service).In the CBL mode, use VIDEO SOURCE toview other video sources (A or B)instead of cable.In all TV mode, use VIDEO SOURCE towatch TV or video/DVD programs on adesired device.For amplifiers/receivers, use VIDEOSOURCE to select an input source.Device TableNOTE:Please refer to the table below whenperforming the instructions in“Programming Device Control” on page 10 or“Setting Up a Combo Unit” on page 11.After programming, the Atlas OCAP 5-Device RemoteControl will be able to control the following types ofdevices:Device KeyControls these types of devicesVCR, TV/VCR Combo, PVR (PersonalVideo Recorder), or extra DVD PlayerDVD Player, or extra VCR, TV/VCRCombo or PVRAudio Amplifier, Tuner, or Receiverwww.urcsupport.com/atlasocap8

Atlas OCAP M1056.fm Page 9 Tuesday, March 24, 2009 4:45 PMDevice KeyControls these types of devicesTelevisionCable Box (Converter) or SatelliteReceiverINSTALLING BATTERIES❶❷❸1.2.3.4.NOTE:On the back of the remote control, push thetab and lift off the battery cover.Locate the two (2) enclosed AA batteries.Match the and - marks with those in thebattery case, then insert them.Align the covers keys with the cases holes andpress the cover back into place. The tab shouldclick when the cover is locked.Test the remote control by pressing any modekey (e.g., TV). If the batteries are insertedcorrectly, the LED (red light) will blink once.When batteries need replacement, the remotecontrol will cease to operate. Replace thebatteries and the unit will be restored to itsfull functionality, complete with your favoritesettings.www.urcsupport.com/atlasocap9

Atlas OCAP M1056.fm Page 10 Tuesday, March 24, 2009 4:45 PMPROGRAMMING DEVICE CONTROLThe Atlas OCAP 5-Device Remote Control ispreprogrammed to operate the cable box (converter)provided by your cable system, an RCA TV, a ToshibaDVD player, an RCA VCR, and a Pioneer audio receiver.To control devices other than the default brands,perform the following steps; otherwise skip this section.NOTES: For control of a Combo device (for example, aTV/VCR combo), skip this section and perform the instructions on “Setting Up a ComboUnit” on page 11. Also refer to “Device Table”on page 8 to find out which devices can beprogrammed onto each device key.If you have another brand of cable converteror a satellite receiver you would like to control,you’ll need to unlock the cable ID Lock beforechanging the converter code (see “Programming Cable ID Lock” on page 17).1.Turn on a device and, if applicable, insertvideo media, (e.g., cassette or disc).NOTE: Please read steps 2 through 4 completelybefore proceeding. Highlight or write downthe codes and device you wish to programbefore moving on to step 2.2.On the remote control, press a device key once(i.e., VCR, DVD, AUD, TV, or CBL); it will blinkonce. Then press and hold SETUP until theselected mode key blinks twice.3.NOTE:4.NOTE:Use the “Manufacturer’s Codes (Codes desmanufacturiers)” starting on page 54) tolocate the type of device and brand name andthen enter the first four-digit code for yourdevice. If performed correctly, the selectedmode key will blink twice.If the selected mode key emits a long blink,the entry is invalid. Repeat steps 2 through 3and try entering the same code again.Aim the remote control at the device andpress PWR once. The device should turn off. Ifit does not, repeat steps 2 through 3, tryingeach code for your brand until you find onethat works. If it still does not respond, trysearching for the code (see “Searching forYour Code” on page 12).If the device does not have a PWR key, pressthe (Play) key.www.urcsupport.com/atlasocap10

Atlas OCAP M1056.fm Page 11 Tuesday, March 24, 2009 4:45 PM5.Repeat steps 1 through 4 for each device youwant the remote control to operate. For futurereference, write down each working devicecode in the boxes on the following page.VC