Transcription

QuickSpecsHPE ProLiant DL380 Generation9 (Gen9)OverviewHPE ProLiant DL380 Generation9 (Gen9)The HPE ProLiant DL380 Gen9 Server delivers the best performance and expandability in the Hewlett Packard Enterprise 2P rackportfolio. Reliability, serviceability and near continuous availability, backed by a comprehensive warranty, make it ideal for anyenvironment. Deploy the data center standard.Front View - 8SFF Chassis with Optional Universal Media Bay shown1.Quick removal access panel3.Optional Optical drive. Requires Universal Media bay5.7.9.11.13.15.Drive Bay 2. Blank shown, 8SFF or 6NVMe optionalPower On/Standby button and system power LED buttonNIC statusUSB 3.0Bay 3Bay 12.Universal Media bay. 2 USB 2.0 and VGA standard(8SFF bay optional)4. Optional 2 SFF HDD, blank shown. Requires UniversalMedia bay6. 8 SFF Drive Cage Bay8. Health LED10. UID button12. Serial label pull tag14. Bay 2Page 1

QuickSpecsHPE ProLiant DL380 Generation9 (Gen9)OverviewRear View1.PCI Slots (Slots 1-3 top to bottom, riser shipped standard)2.3.Optional serial port4.5.7.9.Power supply Power connectionHPE Flexible Slot Power Supply bay 2 (800w shown)Power supply Power LED6.8.10.11. VGA connector13. Dedicated iLO connector15. Unit ID LED12.14.16.PCI Slots (Slots 4-6top to bottom, requires second risercard, and second processor)Optional rear 2 SFF HDD (supported in 24 SFF or 12LFF front end)Power supply Power LEDPower supply Power connectionHPE Flexible Slot Power Supply bay 1 (800w shown)NOTE: Optional Battery Back up option.Embedded 4x1GbE Network AdapterUSB 3.0 connectors (2)Optional FlexibleLOM ports (Shown: 4x1GbE)Page 2

QuickSpecsHPE ProLiant DL380 Generation9 (Gen9)OverviewInternal View1.3.5.Fan cage shown with 6 standard Hot-plug fans (HighPerformance fans optional)MicroSD card slotNOTE: Optional Dual MicroSD.Optional HPE Flexible Smart Array or Smart HBA (H240arshown)7. Connection for second (optional) riser (Required second CPU)9. Primary PCIe riser, standard (Optional double wide GPU riser)11. X4 SATA ports (1 and 2)2.Optional HPE Smart Storage Battery4.Internal USB 3.0 connector (2)6.(Under) Hot Plug redundant HPE Flexible Slot PowersuppliesNOTE: Optional Micro UPS Battery Back up option.8. Embedded 4x1Gbe NIC10. Optional FlexibleLOM slot12. 2 Processors, heatsink showing, with HPE Smart SocketGuide13. DDR4 DIMM slots. Shown fully populated in 24 slots (12 perprocessor)What’s New New SSD and NVMe drive optionsNew NVIDIA Tesla GPUPage 3

QuickSpecsHPE ProLiant DL380 Generation9 (Gen9)Standard FeaturesNOTE: For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.ProcessorModelCPUCoresL3 CachePowerQPIDDR4 HzUp to two of thefrequencyfollowing dependingE5-2699v32.3GHz1845MB145W9.6GT/s2133on 42.6GHz410MB85W8.0GT/s2133Page 4

QuickSpecsHPE ProLiant DL380 Generation9 (Gen9)Standard E: All processors above 120W use a high efficiency Heatsink. Doublewide PCIe cards are onlysupported with this Heatsink. For processors with a standard Heatsink that require double wide PCIecards, the Graphics Enablement kit option is also required (719082-B21).NOTE: Mixing of E5-2600v3 and E5-2600v4 processors is not supported.NOTE: Field upgrade from E5-2600v3 to E5-2600v4 is supported.NOTE: All processors support Hyper-Threading except E5-2609 v4/v3 and E5-2603 v4/v3.ChipsetIntel C610 Series ChipsetIntel E5-2600v3 Processor FamilyIntel E5-2600v4 Processor FamilyNOTE: For more information regarding Intel chipsets, please see the following On SystemManagementChipsetHPE iLO (Firmware HPE iLO4 2.0) 4GB NANDNOTE: Read and learn more in the iLO QuickSpecs.MemoryOne of the followingdepending on modelType:HPE SmartMemoryDDR4 Registered (RDIMM), Load Reduced (LRDIMM) or Persistent Memory (NVDIMM)DIMM Slots Available 24(12 DIMM slots per processor, 4 channels per processor, 3 DIMMs perchannel)Maximum Capacity3TB(24 x 128GB LRDIMM @2400MHz)*(LRDIMM)Maximum Capacity768GB(24 x 32GB RDIMM @2400MHz)(RDIMM)Maximum Capacity128GB(16 x 8GB NVDIMM)*(NVDIMM)NVDIMM support only with the E5-2600v4 processors, and RDIMMs only Memory ProtectionNote mixing of 2133 and 2400MHz memory is not supportedNote mixing of RDIMM and LRDIMM memory is not supportedNote the 128GB LRDIMM may not be mixed with other DIMM capacities/typesAdvanced ECCOnline SpareExpansion SlotsPrimary Riser(Standard)Advanced ECC uses single device data correction to detect and correct single andall multibit error that occurs within a single DRAM chip.Memory online spare mode detects a rank that is degrading and switchesoperation to the spare rank.ExpansionSlots #1TechnologyPCIe 3.0BusWidthX8ConnectorWidthX16BusNumber72PCIe 3.0X8X1610Form Proc 1Proc 1Page 5

QuickSpecsHPE ProLiant DL380 Generation9 (Gen9)Standard Featureshalf-lengthslot3PCIe 3.0X8X813HalfProc 1length/fullheightNOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.NOTE: All slots support PCIe cards to 150W or more depending on card, but an additional Power CordOption is required (PN 669777-B21). See Option Section below for offering.NOTE: Double wide PCIe cards are only supported in risers with the Processors leveraging the HighPerformance Heatsink. For Processors requiring double wide GPU support please order the GPUenablement kit (719082-B21).Slot 2 PCIe Riser(Optional 3-slot)719073-B21Slot 1 PCIe Riser(Optional 2-slot)719076-B21Storage ControllerOne of the followingdepending on modelExpansionSlots #4TechnologyExpansionSlots #2TechnologyPCIe 3.0BusWidthX16ConnectorWidthX16BusNumber16Form m FactorNotesFull-height,Proc 2full-lengthslot5PCIe 3.0X16X1620Full-height,Proc 2full-lengthslot6PCIe 3.0X8X823Full-height,Proc 2half-lengthslotNOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.NOTE: When populating the second optional riser slot, the second processor must be installed.NOTE: All slots support PCIe cards to 150W or more depending on card but an additional Power CordOption is required (PN 669777-B21). See Option Section below for offering.NOTE: Double wide PCIe cards are only supported in risers with the Processors leveraging the HighPerformance Heatsink. For Processors requiring double wide GPU support please order the GPUenablement kit (719082-B21).PCIe 3.0NotesFull-height,Proc 1full-lengthslot3PCIe 3.0X8X80x08Full-height,Proc 1half-lengthslotNOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.NOTE: This will replace the standard primary riser and supports double wide cards.NOTE: All slots support PCIe cards to 150W or more depending on card, but an additional Power CordOption is required (PN 669777-B21). See Option Section below for offering.NOTE: Double wide PCIe cards are only supported in risers with the Processors leveraging the HighPerformance Heatsink. For Processors requiring double wide GPU support please order the GPUenablement kit (719082-B21).Entry ModelsHPE Dynamic Smart Array B140i ControllerNOTE: The embedded B140i controller will operate in UEFI only mode. For legacy support an additionalcontroller will be needed, and for CTO orders please also select the Legacy mode settings part, 758959B22.Page 6

QuickSpecsHPE ProLiant DL380 Generation9 (Gen9)Standard FeaturesNOTE: The B140i defaults to AHCI off the chipset. Smart array needs to be enables on the SATA onlymodels if required.NOTE: The B140i will not operate in Legacy mode.Base ModelsHPE Dynamic Smart Array B140i ControllerHPE Flexible Smart Array P440ar/2G FIO ControllerHPE Flexible Smart Array P840/4G FIO ControllerHPE Smart Array P840ar/2G ControllerPerformance ModelsHPE Dynamic Smart Array B140i ControllerHPE Flexible Smart Array P440ar/2GBInternal StorageDevicesOne of the followingdepending on modelMaximum InternalStoragePower SupplyOptical DriveHard DrivesHard Drive BaysHot Plug SFF SASHot Plug SFF SATAHot Plug LFF SASHot Plug LFF SATAHot Plug SFF SATASSDHot Plug LFF SATASSDHot Plug SFF NVMePCIe SSDShips standard in Performance ModelsOptional: DVD-ROM, DVD-RWNone ship standard8 SFF with optional Universal Media Bay, 8 SFF bay or 6 NVME drive options24 SFF plus optional 2 SFF drives rear12 LFF plus optional 3 LFF drives rearNOTE: The 3 LFF rear drives will consume space for the secondary riser.NOTE: The 12 LFF chassis also supports 2 SFF rear which allows for the secondriser.NOTE: The 6 NVMe drive option can only be leveraged in the SFF chassis andreplaces Bay 2.4 LFF drive bays totalNOTE: The Universal Media Bay (724865-B21) not available with the LFFchassis or the 24SFF front end, and can only be populated in Bay1.NOTE: The 8SFF can be upgraded with a drive cage to 16 or 24 SFF with fieldupgrades. For optimal upgrade Bay2 should be populated second, with Bay 3the last to be populated for a field upgrade to 24 SFF.NOTE: The 4LFF chassis cannot be upgraded to 12LFF in the field.NOTE: All Pre-configured Chassis come with an embedded 10-Port SATAcontroller. Optional HPE Flexible Smart Array and Smart SAS HBA Controllerscan be FIGURATION24 2 x 2TB (with optional rear SFF drive cage)24 2 x 2TB (with optional SFF drive cage)12 3 x 10TB (with optional rear LFF drive cage)12 3 x 10TB (with optional rear LFF drive cage)24 2 x 3.84TB (with optional rear SFF drive cage)57.6B12 3 x 3.84TB (with optional rear LFF drive cage)12TB NVMe 6x2TB NVMe plus 36TB with 18 SFF (Bay 1, bay 3 and optional36TB SFFrear drive support)HPE 500W Flex Slot Platinum Hot Plug Power SupplyNOTE: Available in 94% efficiency.HPE 800W Flex Slot Platinum Hot Plug Power SupplyNOTE: Available in 94% and 96% efficiency.Page 7

QuickSpecsHPE ProLiant DL380 Generation9 (Gen9)Standard FeaturesNOTE: Also available in -48VDC and 227VAC/380VDC power inputs.HPE 1400W Flex Slot Platinum Plus Hot Plug Power SupplyNOTE: Available in 94% efficiency.HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows forhot plug, tool-less installation into HPE ProLiant Gen9 Performance Servers. Flex Slot power supplies arecertified for high-efficiency operation and offer multiple power output options, allowing users to "right-size"a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overallenergy costs, and avoid "trapped" power capacity in the data center.All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumpercord is also included with each standard AC power supply option kit. If a different power cord is required,please check the ProLiant Power Cables web page.To review the power requirements for your selected system, please use the HPE Power Advisor Toollocated at http://www.hpe.com/info/hppoweradvisor.Power specifications and technical content for all HPE Server power supplies can be found tem FansOne of the followingdepending on modelNon-redundantRedundant2P model6 fansNOTE: 1P models typically ship with 4 standard fans. The second processor option kit contains 2additional fans.NOTE: The 12LFF and 24SFF chassis ship with 6 High Performance fans as standard.NOTE: High Performance Fan Kit is available to meet ambient temperature environments.NOTE: High Performance Fan Kit is required for Passive GPU support.NOTE: The 8SFF Bay1 kit (719067-B21) will ship with 6 High efficiency fans.InterfacesSerialVideoOptional2 (1 front, optional via Universal Media Bay, 724865-B21), 1 back notactive simultaneously4 x 1Gb ports shipping standard with optional FlexibleLOM1 Gb DedicatedFlexibleLOM Network PortsHPE iLO RemoteManagement Network PortMicro SD Slot1 Micro SDNOTE: The Micro SD slot is not a hot-pluggable device. Customers should not attempt to plug an SDcard into the SD slot while the server is powered.USB 3.0Up to 5 total: 1 front, 2 rear, 2 internal (secure), 2 optional USB 2.0 front viaUniversal Media BaySID (Systems Insight Display) OptionalNOTE: Not shipping as standard. Available as a CTO option or as a field upgrade (768900-B21).Operating Systems Microsoft Windows Serverand VirtualizationCanonical UbuntuSoftware Support forRed Hat Enterprise Linux (RHEL)ProLiant ServersSUSE Linux Enterprise Server (SLES)Oracle SolarisVMwarePage 8

QuickSpecsHPE ProLiant